========================================================================
*** Basic Information ***
========================================================================
[Create date] 2013/06/28
------------------------------------------------------------------------
[Program Name] Scanner
------------------------------------------------------------------------
[Version] 01.25
------------------------------------------------------------------------
[PCB No.] 
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0255570K
[File Information]
 File Name         D0255570K.fwu
 File Type         Module for Service
 Size              1.20 MB ( 1254840 byte )
[File Information]
 File Name         D0255570K.rfu
 File Type         Module for Remote Upgrade
 Size              1.20 MB ( 1261824 byte )
------------------------------------------------------------------------
[Production reflection] 2013/3
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note] 

------------------------------------------------------------------------


========================================================================
*** Important Notes ***
========================================================================
[Important Notes] 

------------------------------------------------------------------------


========================================================================
*** Modification History ***
========================================================================
[Modifications made:]
Symptom corrected:
WSD scanning a color jpg results in any subsequently scanned
BW TIFFs being output as PDFs.


------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 01.24
Other changes:
WSD Scanner (Push Type) now supports Windows 7/Windows 2008 Server R2.
Notice: Due to Windows 7/WIndows 2008 Server R2 spec changes, WSD 
Scanner (Push Type) jobs that are in-progress can no longer be
manually cancelled from the PC side.

Symptom corrected:
1. A scan configured to output a Multi-page TIFF might have actually
   output a PDF. This only occurred if both of the following
   conditions were met:
   - Scanner operation panel > Send Settings > Compression (Gray
     Scale/Full Color) > OFF
   - Scanner operation panel > Scan Settings > Scan Type > Auto Color
     Select
2. The MFP operation panel might go black and not return until the
   power is cycled. This only occurred if User Authentication was
   enabled or the MFP had a Device Accounting Unit such as a coin
   collector or charge card reader.

----------------------------------------
Version 01.23
Symptom corrected: 
1. Scan to NCP fails if all of the following conditions met:
- The destination is specified using the IP address.
- The Novell server and the device are in different subnets.
- The subnet routers filter SLP multicasts.
Note: Requires System firmware (version 1.22 or later) and Scanner
 firmware (version  01.23 or later).
2. Scan to NCP fails or takes long time to complete if the IPX
   protocol is used and there are more than 2 Novell Directory
   Services (NDS) servers in the netwok hierarchy.
Note: Requires System firmware (version 1.22 or later) and Scanner
 firmware (version  01.23 or later).

----------------------------------------
Version 01.22
Other changes:
1. Multiple stored jobs submitted for printing simultaneously will
   now be recorded individually in the Job log instead of only the
   first job being recorded. This change only applies to non-print
   jobs that have been stored. Prior to this change, the printing of
   stored print jobs were already recorded individually in the Job
   log.
Note: Requires the following firmware versions (or later):
System (version 1.21), Websys (version 1.10), Scanner (version
01.22), WebUapl (version 1.08), and either of NFA (version 1.03).


----------------------------------------
Version 01.21
Symptom corrected: 
1. Job log CSV file contains the wrong "User Entry ID" for scanner 
   jobs that were sent from the document server. This only occurred 
   using either UserCode Authentication or Basic Authentication.
2. The Job log displayed by WSDM contains the wrong "User Code/User 
   Name", "User Entry ID" and "User display name" for scanner jobs 
   that were sent from the document server. This only occurred using
   either UserCode Authentication or Basic Authentication.

----------------------------------------
Version 01.20
Symptom corrected:
1. Some characters are printed out incorrectly on the Scanner 
   Sending History on machines for certain regions.

----------------------------------------
Version 01.19
Symptom corrected:
1. The scanner will stall "Updating the destination List. Please
   wait..." will be displayed on the operation panel. This occurs if
   the device's address book is updated via ScanRouter while the
   device is in Sleep Mode.

----------------------------------------
Version 01.17
1st Mass production